[fusion_builder_container type=”flex” hundred_percent=”no” hundred_percent_height=”no” hundred_percent_height_scroll=”no” align_content=”stretch” flex_align_items=”flex-start” flex_justify_content=”flex-start” hundred_percent_height_center_content=”yes” equal_height_columns=”no” container_tag=”div” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” status=”published” border_style=”solid” box_shadow=”no” box_shadow_blur=”0″ box_shadow_spread=”0″ gradient_start_position=”0″ gradient_end_position=”100″ gradient_type=”linear” radial_direction=”center center” linear_angle=”180″ background_position=”center center” background_repeat=”no-repeat” fade=”no” background_parallax=”none” enable_mobile=”no” parallax_speed=”0.3″ background_blend_mode=”none” video_aspect_ratio=”16:9″ video_loop=”yes” video_mute=”yes” absolute=”off” absolute_devices=”small,medium,large” sticky=”off” sticky_devices=”small-visibility,medium-visibility,large-visibility” sticky_transition_offset=”0″ scroll_offset=”0″ animation_direction=”left” animation_speed=”0.3″ filter_hue=”0″ filter_saturation=”100″ filter_brightness=”100″ filter_contrast=”100″ filter_invert=”0″ filter_sepia=”0″ filter_opacity=”100″ filter_blur=”0″ filter_hue_hover=”0″ filter_saturation_hover=”100″ filter_brightness_hover=”100″ filter_contrast_hover=”100″ filter_invert_hover=”0″ filter_sepia_hover=”0″ filter_opacity_hover=”100″ filter_blur_hover=”0″][fusion_builder_row][fusion_builder_column type=”1_1″ type=”1_1″ align_self=”auto” content_layout=”column” align_content=”flex-start” content_wrap=”wrap” spacing=”” center_content=”no” link=”” target=”_self” min_height=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” sticky_display=”normal,sticky” class=”” id=”” type_medium=”” type_small=”” order_medium=”0″ order_small=”0″ dimension_spacing_medium=”” dimension_spacing_small=”” dimension_spacing=”” dimension_margin_medium=”” dimension_margin_small=”” dimension_margin=”” padding_medium=”” padding_small=”” padding_top=”” padding_right=”” padding_bottom=”” padding_left=”” hover_type=”none” border_sizes=”” border_color=”” border_style=”solid” border_radius=”” box_shadow=”no” dimension_box_shadow=”” box_shadow_blur=”0″ box_shadow_spread=”0″ box_shadow_color=”” box_shadow_style=”” background_type=”single” gradient_start_color=”” gradient_end_color=”” gradient_start_position=”0″ gradient_end_position=”100″ gradient_type=”linear” radial_direction=”center center” linear_angle=”180″ background_color=”” background_image=”” background_image_id=”” background_position=”left top” background_repeat=”no-repeat” background_blend_mode=”none” animation_type=”” animation_direction=”left” animation_speed=”0.3″ animation_offset=”” filter_type=”regular” filter_hue=”0″ filter_saturation=”100″ filter_brightness=”100″ filter_contrast=”100″ filter_invert=”0″ filter_sepia=”0″ filter_opacity=”100″ filter_blur=”0″ filter_hue_hover=”0″ filter_saturation_hover=”100″ filter_brightness_hover=”100″ filter_contrast_hover=”100″ filter_invert_hover=”0″ filter_sepia_hover=”0″ filter_opacity_hover=”100″ filter_blur_hover=”0″ last=”no” border_position=”all”][fusion_accordion border_size=”1″ hide_on_mobile=”small-visibility,medium-visibility,large-visibility”][fusion_toggle title=”How to install the control app?” open=”no”]

Please Install the Control APP in Apple Store:

https://apps.apple.com/us/app/phantomgpsii/id1484343559

[/fusion_toggle][fusion_toggle title=”How to operate the device?” open=”no” class=”” id=””]

How to Connect the Device

  1. Press and hold the power button for 2 seconds to start the device.
  2. Unlock the iPhone screen.
  3. Plug the Lightning cable of the device into the charging port of the iPhone.
  4. The charging indicator in the upper right corner of the iPhone lights up;
    Or it will prompt “This accessory may not be supported”. Since the small battery in the device cannot charge the iPhone, this is a normal phenomenon. Click OK to ignore it.
  5. After 3 seconds, the iPhone will prompt “Trust This Computer?“, select “Trust“, and enter the password (if any).
    Will not be prompted to trust again until the device restart
  6. Open the APP PhantomGPSII, wait a few seconds, observe the USB icon in the lower right corner of the screen, green means that the external device and the iPhone are connected and paired successfully.
    Red means they are not connected. If the red icon has been displayed for a long time and there is no prompt on the screen, you can try the following steps to reconnect:
    1) Re-plug the cable, or
    2) Restart the external device, or
    3) Restart the phone.

[/fusion_toggle][fusion_toggle title=”How to operate the app?” open=”no” class=”” id=””]Tutorial For the APP

  1. Mode selection
    • Teleport” means that the disguised address is a fixed point and will not move;
    • Cruise” means that after setting the starting point, ending point and passing point, the system will calculate the appropriate route and move along the route.
  1. Connect Peripherals
  2. Drag and zoom the map to move the destination address directly below the water drop in the center of the screen.
  3. In Teleport mode, click the small airplane icon  in the lower right corner of the screen to confirm the position setting.
  4. In Cruise mode, click the Add and Done buttons to set the start and endpoints of your route.
  5. Check whether the icon (blue dot and white circle) representing the current position has moved to the specified position you choose. If there is, you succeed.
    • You must plug in the device, and click the stop button , or restart the iPhone to return to the real position.
      Or your iPhone will not return to the real position.

[/fusion_toggle][fusion_toggle title=”Other tips about the phantom device” open=”no” class=”” id=””]

About LED in Device

  1. Power Supply
    • The blue light will always be on when starting up.
  2. Power Usage
    • While the battery is charging, the red light flashes at a rate of once per second.
    • When fully charged, the red light is always on.
    • When the battery is low, the red light will flash rapidly at a rate of 3 times per second.

Button/Charge

  1. Charge
    • Use the Micro USB charging cable to charge the device. After the battery is fully charged, it can work continuously for 7-8 hours.
    • When the device is connected to the mobile phone and plugged in the charger, it will charge the mobile phone and the device at the same time. The charging current of the mobile phone is lower than 1A, and the efficiency is not high.
    • When the charger is not plugged in, the iPhone screen (probably) will show the charging icon, and the phone is not actually in the charging state.
  2. Power Switch
    • Press and hold for two seconds to turn on/off.
  3. Direction Rocker
    • In Teleport mode, the joystick can be operated while the function is running.
    • The distance of each step is about 1/3 of the scale. Adjust the step size by zooming the map
    • Normal sensitivity, response time about 0.5 seconds
    • The direction can’t be set.

Tips

  1. The star icon can save the location and route, and open the folder icon in the upper right corner to edit.
  2. The input format of latitude and longitude is: “Latitude, Longitude”, only supports the format of percent, not the format of degrees, minutes, and seconds, such as “39.9051667,116.3968585”
  3. Before importing a gpx file, you need to switch to the Cruise.

[/fusion_toggle][/fusion_accordion][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]